Why battery energy storage systems might be the answer to our energy storage needs

Key takeaways

Battery Energy Storage Systems (BESS) help stabilise renewable energy by storing excess power and releasing it when needed. However, opposition is growing in the UK due to concerns over safety, environmental impact, and the industrialisation of rural areas. Controversial projects, like the Thirsk Gigapark, highlight the need for better safety measures, community engagement, and strategic site selection. Overcoming these challenges is key to ensuring BESS supports the UK’s transition to sustainable energy.

The transition to renewable energy is accelerating, with wind and solar power leading the charge.

However, one of the biggest challenges facing renewable energy is its intermittent nature—solar panels only generate electricity when the sun is shining, and wind turbines only produce power when the wind is blowing. 

This mismatch between energy generation and demand has long been a barrier to fully embracing renewables.

Battery Energy Storage Systems (BESS) may provide the solution. 

These large-scale battery facilities store surplus renewable energy when it is generated and release it when demand is high. 

By smoothing out fluctuations in energy supply, BESS enables a more stable, reliable grid. 

But despite their promise, there is opposition to battery storage projects amongst locals.

How Battery Energy Storage Systems solve the storage problem

Traditional energy grids rely on a balance between supply and demand, but renewables disrupt this balance because they generate power unpredictably. 

BESS can help by:

  • Storing excess energy – During peak production times, such as midday for solar farms or windy nights for wind farms, excess electricity can be stored in batteries instead of being wasted or curtailed.
  • Providing power during high demand – When demand rises and renewable generation drops (e.g., evenings when people return home and switch on appliances), stored energy can be discharged to keep the grid stable.
  • Reducing reliance on fossil fuels – By providing a buffer, BESS reduces the need for backup power from gas or coal-fired plants.
  • Enhancing grid stability – Batteries can react to fluctuations in milliseconds, preventing blackouts and improving grid efficiency.
  • Supporting decentralised energy – Local battery storage solutions allow communities and businesses to become less reliant on the national grid and use more of their self-generated renewable power.

The opposition to battery storage in the UK

Despite these clear advantages, the rollout of BESS projects across the UK has faced significant opposition from local communities and planning authorities. 

Concerns range from environmental and safety risks to fears of industrialisation in rural areas. 

Here are some key examples:

  1. Wiltshire Battery Storage Facility In 2023, a proposal for a large battery storage site in Wiltshire, was met with strong opposition from local residents. Concerns were raised about potential fire hazards, the visual impact on the countryside, and the strain on local infrastructure. Despite these objections, the project was eventually approved due to its strategic importance in supporting the grid.Plans for further storage facilities have been rejected. 
  2. Frome Battery Storage Plant Another example is a battery storage plant in Somerset, which faced pushback over fire risks and proximity to residential areas. Residents feared the possibility of thermal runaway—where batteries overheat and catch fire—though developers reassured the public with rigorous safety measures.
  3. Scotland – Kilmarnock Battery Project In Scotland, plans for a battery storage facility in Kilmarnock were rejected after local councillors deemed it an inappropriate use of greenbelt land. Environmental concerns and potential noise pollution were cited as primary reasons for the refusal.
  4. North Yorkshire – Thirsk Gigapark Opposition A proposed battery storage facility near Thirsk, North Yorkshire, has also sparked controversy. Developer NatPower has pledged up to £40 million in community funding over 40 years if the project goes ahead. The plans include a 108-acre nature recreation area with woodlands and wildlife ponds. However, campaign group Thirsk Against Battery Storage (TABS) remains opposed, citing concerns over visual impact, relocation of substations, and limited scope of the community funding. Some locals argue the changes made after consultation do not address their core concerns, and opposition remains strong.

Addressing concerns and moving forward

The opposition to battery storage projects highlights the need for careful planning, transparent communication, and rigorous safety measures. 

Some key steps to address concerns include:

  • Enhanced Safety Protocols – Developers must implement advanced fire suppression systems and comply with strict safety standards to reassure the public about potential hazards.
  • Community Engagement – Early and open discussions with local residents can help address fears and highlight the benefits of energy storage, such as reduced reliance on fossil fuels and lower electricity costs.
  • Strategic Site Selection – Placing battery storage facilities in industrial zones or brownfield sites instead of greenbelt land can reduce opposition.
  • Clearer Government Policies – National and local governments must provide clearer guidelines and incentives to support BESS development while balancing environmental and community concerns.

The future of battery energy storage

Battery Energy Storage Systems offer a vital solution to the problem of renewable energy intermittency. 

They enable the efficient use of wind and solar power, reduce reliance on fossil fuels, and enhance grid stability. 

However, the UK’s growing opposition to battery storage highlights the challenges that come with large-scale infrastructure projects.

By addressing safety concerns, improving community engagement, and strategically selecting locations, BESS can become a key component of the UK’s transition to a greener, more resilient energy system. 

The sooner these challenges are overcome, the sooner we can fully harness the potential of renewables and move towards a more sustainable future.

About the author

Matthew Conway
MD

Matthew has worked from the bottom up in the NDT sector, giving him a unique insight into the needs of the industry. He has experience working with a range of NDT techniques and understands what clients need from an NDT service provider. 

Matthew started out as a trainee NDT technician back in 2008. Over the following 4 years, he gained PCN level 2 qualifications in DPI/MPI/RT and UT. 

He was then employed as a Radiographer by various companies before setting up his own business in 2013. Matthew worked as a freelancer on several different projects and contracts using all four of his NDT disciplines.

Throughout the years, Matthew has seen the need for an NDT company that delivers high-quality NDT services with a fast turnaround. 

This led him to co-found NDT Group in 2017 with a clear vision: an NDT company that values both its team and community and is dedicated to providing exceptional non-destructive testing services. NDT Group works tirelessly to ensure that your equipment and structures are safe and reliable.

Linkedin profile link

Responsive testing that delivers assurance that your equipment is safe.

Contact us for a quality testing service with a fast report turnaround. We can respond to any challenge.

LET'S TALK

Keep up to date with site and asset safety

Sign up to our newsletter to get updates on keeping your site and assets safe.
(We won’t pass your email on to anyone else)